16"X16" Porcelain Set On Diagonal. (Hansen Landing, Stuart)
Only Bedrooms Tiled. Moc Brown sanded Grout
24"X24" Disstressed Edge Marble.
Thin-set Application Standard Pattern. (Port St. Lucie)
6"X24" Porcelain Wood Look Tile.
Marriott Lobby (Stuart).
17"X17" Pocelain (Diamonds By Terry) Tea Room Dixie, Stuart
Diagonal Set With Charcoal Sand Grout. (A.1.A Stuart)
16"X16" Diagonal Set Back Porch (Left) 12"X12" Straight Set Master Bedroom (right)
 |
 |
18"X18" Porcelain Final Wash (Rocky Point)
Step #1 Tear Out. Somerset, Stuart
Tear Out Old Worn Carpet Padding and Tack Strip From Kitchen/Dining Area.
Step #2 Prep Floor To Remove any High or Low Spots.
Also Provides A Greater Bond for New Tile. Begin Layout, Start Setting.
Step #3 Set Cuts, Grout. (Sandstaone Sanded)
Kick Carpet to Finished Tile.
12"X12" White Tile In through Dining Into Office.
I Used A Dutchman To Seperate old Tile To New With Sanded Tarra Cotta Grout. (Jensen Beach)
12"X24" Brick Joint Kitchen (Left) 16"X16" Off Set Pattern Kitchen (Right)
 |
 |
Hopscotch Pattern Throughout Hallway. (Mariner Sands)
Ocean Blue Straight Set 12"X12" (Stuart West)
Front Entry/Foyer with Listello 20"X20" Diagonal Brick Joint
 |
 |
Straight Set With Listello Boarder Flowing in to Diagonal (Stuart West)
Brick or staggered joint Diag Listello Straight Set
 |
 |
Straight Set Listello Boarder Straight Set Feild (Hobe Sound)
Applying 511 Stone Sealer
511 With Permanantly Seal Marble and Grout without changing color.
18"X18" Honed and Filled Travertine. (Sailfish Point)
This Marble was set with 1/2 Mortor Mix and with 1/16 inch Joint.
Matching Old Tile With New. (Jensen Beach)
Tiles On Left Are 1/4 inch Smaller. With Dutchman in Middle It Appears To Look The Same.
18"X18" Trav Honed/Filled Set On Diagonal (Sailfish Point)
In order to ensure an even color layout of the tiles, I sort them before installation.
18"X18" Pocelain Tiles (Palm Cove Country Club)
Straight Set With Oyster Sanded Grout.