Prep / Buff floor with 60 grit sand paper
The yellow at bottom is suppresion from a crack that ran across entire floor.
Installed / Grouted
This is an 18"X24" Porcelain Slate Look Tile From Floor Specialist. Looks and feels like the real thing.
Step #1 Prep. Master Shower Walls
Cement Backer Unit (Durrock) Walls, Begin making corner seat from Cinder Blocks, Fiber Mess Tape Corners & Joints.
Step #2 Set.
13"X13" Porcelain Tile Straight Set Up to 2"X2" Listello, Set Straight above.
Step #3 Grout.
Bullnose wrapped around Window corners and seat. Light Sand Sanded Grout Used on Walls an Floor.
Step #1 Prep. Outside Front Entry.
Sanded Grey Multipurpose With 6' Straight Edge. (Removes any Humps, Bumps and Dips)
Step #2 Set Diagonal With Picture Frame.
16' X 16" Rialto Biege Set with Latex Additive Thin-Set.
Step #3 Grout.
.
Prep with mud and thin-set
This Floor needed alot of prep to get it flat enough for tile.
Installed / Grouted
Wood look grain tile. 1/8 inch grout with moc brown sanded grout.
Step #1 Prep.
Durrock Walls 1/2 inch thick / Tape walls with Modified Thin-Set Mortor.
Step #2 Set.
Set to listello / Continue to top. Shower Floor Packed Set with 2"X2" Mosaic tile
Step # 3 Grout.
Grout Light sand Caulk around All windows.
Step # 1 Shower Floor With 2 Drains.
The light grey is a screed of floor mud set level the day before. Dark Grey is the Floor mud Apex'd to drain set today.
Step # 2 Install.
Shower Floor Centered, Set straight.
Step # 3 Grout.
I used same Grout as walls Light Sand.
Handicape Accessable.
Dry Floor (bottom right) Is set an 1/8th inch higher than the shower floor.
Step # 1 Prep. Master Bedroom Floor 180 Sq. Ft.
I used a 6' Straight Edge And Multi purpose Thin-Set To remove any Humps, Bumps, Bellies or Crowns.
Step # 2 Set & Grout.
Set Striaght Pattern With 3/16" Grout Joint, Champagne Sanded Grout.
Before Durrock Walls (South Stuart)
Prepped joints and corners with unsanded thin-set and fiber mesh tape. Layout Centered
Finished!
6"X6" White Glazed Tile On Backsplash. (Golden Gate)
Straight Set With Diagonal Inserts.
Lay out Begin Setting 1"X1" Glass Tiles.
I centered tiles for a much more even layout.
I used white unsanded grout.
I let grout set up so it will be full in grout joints.
Remove tape and set into place.
I used a 511 grout impregnator sealer for the grout joints.
